safetycert.info
HOME   SEATING   ELECTRICAL   WINDSCREENS   BODY & FRAME   TOW COUPLINGS   STEERING & SUSPENSION   WHEELS & TYRES   BRAKES   ENGINE & DRIVELINE   SAFETY DEVICES  

queensland safetycert.info

Safety Certificate Vehicle Inspection Guidelines

drawn from the Queensland Department of Transport and Main Roads Code of Practice - Vehicle Inspection Guidelines

WINDSCREEN AND GLAZING INSPECTION GUIDELINES

Vehicle inspection is subjective and the guidelines open to varying interpretation from inspector to inspector. Below is a list of reasons for possible rejection pertaining to Windscreen and Glazing for the issuing of a Queensland Department of Transport and Main Roads safety certificate (formerly roadworthy certificate or RWC).
SECTION 3   -   WINDSCREEN AND GLAZING
Objective: To ensure that the windscreen, windows and associated components are in such a condition that the driver has a clear field of vision and provide sufficient ventilation for occupants.

In this section:-
Safety glass includes non-shatterable transparent material.

Wiper component includes blade rubbers and wiper arms.
3.1   WINDSCREEN AND GLAZING
Possible reasons for inspection rejection:
  • Vehicles built after 1 July 1953 are not equipped with safety glass or non-shatterable transparent material, wherever transparent material is used (windscreens, side windows or interior partitions). Non-shatterable means not able to break or be broken into many small pieces.
  • Tinting is applied to the front windscreen, apart from a strip of material fitted to the upper edge of a windscreen which extends no lower than a horizontal line contacting the uppermost point of the arcs swept by the vehicle manufacturer's original wiper blades or the upper 10 percent of the windscreen, whichever is the lesser.
  • Windows other than the front windscreen have a light transmittance factor less than 35% (T35) unless specifically approved.
  • Tinting material (of any shade) with a reflectance of more than 10% is fitted to a window.
  • Tint films are not free of bubbles, scratches or other defects that significantly affect the driver's field of view.
  • The area of windscreen swept by the wipers to the right of the centre of the vehicle has bull's-eyes or star fractures more than 16mm in diameter or cracks more than 150mm long which either penetrate more than one (1) layer of the glass in a laminated windscreen or interfere with the driver's vision.
  • The interior surface of a laminated glass windscreen is cracked.
  • Windscreens are removed and not replaced.
  • Anything is fitted to the windscreen or vehicle that obstructs the driver's vision through the swept area of the windscreen.
  • Posters, stickers or other non-transparent materials that would interfere with the driver's vision are affixed to the windscreen.
  • Windows are cracked or broken.
  • At least half of the number of windows which are designed to be opened, which must include the driver's window, are not capable of being opened.
3.2   WINDSCREEN AND GLAZING REPAIRS
Possible reasons for inspection rejection:
  • Windscreens are not repaired in accordance with the relevant Australian Standards
  • Any windscreen repair exhibits significant optical defects which would distort or distract the vision of the driver when inspected from the inside of the vehicle.
  • Windscreen repair is not performed in accordance with the manufacturer's instructions.
  • Repairs in the swept area of the windscreen wipers reduce the effectiveness of the wiper blades.
  • Replacement windscreen or window glass or any glazing is not of an approved type of safety glass and does not bear an identification mark indicating the standard to which the glass has been manufactured (e.g. AS 2080).
  • Replacement windscreen and window glass is not etched or indelibly printed with the glass manufacturer's information. Decals and adhesive labels are not acceptable.
3.3   WIPERS, WASHERS AND DEMISTER
Possible reasons for inspection rejection:
  • Windscreen wipers are not operational at all speeds, do not return to their correct parked position or are not operable by the driver from the normal driving position.
  • Wiper components are not in good condition (i.e. rubbers are split, frayed, hardened or perished and/or wiper arms/blades are missing, bent or twisted preventing the wiper blade rubbers from clearing the windscreen effectively).
  • The vehicle is not fitted with a windscreen washer system (where applicable) that is operational, is incorrectly aimed or is not operable from the normal driving position.
  • Vehicles as listed in Information Sheet 14 in Vehicle Standards Instruction G21 - Information Sheets for Approved Examiners are not fitted with a windscreen demister or washer or the windscreen demister or washer is not working.
  • A demister (where required) does not have the ability to effectively demist the screen (hot or cold air is acceptable).Note: Rear demisters and rear window wipers are not required in ADRs and, as such, they are not required to be operable.
AIS 7284
for further info on Queensland Motorcycle Safety Certificates contact
Queensland's original mobile motorcycle safety certificate inspection service
MOTORCYCLE ROADWORTHYS
1800 BIKE RWC    1800 245 359
HOME   SEATING   ELECTRICAL   WINDSCREENS   BODY & FRAME   TOW COUPLINGS   STEERING & SUSPENSION   WHEELS & TYRES   BRAKES   ENGINE & DRIVELINE   SAFETY DEVICES